Clear HistoryRecent Searches
Ship From:
Dispatch:Usually will be shipped inbusiness dayshours
Loading...
Ship to
color:
Average Rating:
based on 34 Customer Reviews
Share your thoughts with other customers and get Godjm Points, the first 5 reviews get DOUBLE Godjm Points!
Write a Customer ReviewBy m. parr
August 31, 2021
Chemical engineers are remarkable, who ever designed this little wheel should be heralded and loved by the masses.This just flat out works. With this one wheel, I was able to remove the pin striping from my one ton Dodge king cab truck, and still enough material to remove a 3 foot by 4 foot faded vinyl graphic from the nose of my travel trailer. Whether the surface is steel or fiberglass this takes the vinyl off with no damage to the paint underneath.I found that a plug in drill worked the best to remove the material, more consistent than a battery drill.
By stoberkins
May 9, 2022
I bought a truck that had some ugly pinstriping and pieces of foam tape around the edges of the bed from where a topper used to be. I was skeptical of this product at first considering it was ,off brand., but boy was I wrong. I put this on my cordless drill. set it to a higher gear on drill mode to get maximum speed. and this magical device PLOWED through the pinstriping. I removed the back,to,front length on one side of my truck in about 2 minutes. It chewed through the pieces of double sided tape stuck to the bed of the truck. Obliterated that annoying dealership sticker. Do not hesitate. This thing works 200, better than you expect it to.
By durtymax
April 30, 2022
With this wheel I was able to debadge the rear of my car in a literal 7 minutes from beginning to end. Heated up the emblem with hair dryer. used dental floss to remove plastic emblem. used wheel to remove adhesive residue. There was ZERO scratching when done. Clear coat was 100, perfect in every way. I did make sure to wipe the area with quick detailer spray after removing the plastic letters to remove any grime hiding under them right before using wheel. any dust will cause scratching. This worked 100, and exceeded my expectations.
By landmanhall
April 28, 2022
I used this to remove the remnants of the body side moulding of a 1994 Mercury Grand Marquis. The wheel went right through the leftover foam tape and the adhesive underneath without scratching or marring the paint significantly. I attribute the small amount of marks to be from dirt still adhered to the tape. You have to use a good car wash soap and a detail brush to remove as much dirt before using this wheel. It does take some skill but the learning curve is quick. I suggest a corded drill and a firm grip and a medium to light touch. Once I polished the area you could not tell anything was ever there. Put a drop of lock tight on the threads as soon as you open it. trust me.
By leecita
April 26, 2022
I used this to remove the pinstripe on my previously owned 2016 Honda Accord Sport. I live in TX. so though the pinstripe was not very old. it has baked long enough in the hot TX summers to have some extra crusted on goodness! I watched a few videos on using an eraser wheel for such purposes. attached this to our Ryobi power drill. and went to work. Definitely requires a strong hand and some decent leverage of your body weight. but it worked great! I do not do much work with a cars ,I am a 30 something female accountant with very little interest in spending time on my vehicle. but the superficial part of me did not care for the outdated aesthetic of a pinstripe,. The pinstripe on both sides of the car ate through maybe 1,3rd of the useable portion of the eraser wheel...plus. I used it to buff out a few other scuffs and marks while I was at it. I will be holding onto the wheel to buff out new marks in the future. I probably spent about 2.5 hours on the whole project. but now you would never know I had a pinstripe. The paint looks as good as new. Highly recommend.
By m. parr
April 22, 2022
Chemical engineers are remarkable. who ever designed this little wheel should be heralded and loved by the masses.This just flat out works. With this one wheel. I was able to remove the pin striping from my one ton Dodge king cab truck. and still enough material to remove a 3 foot by 4 foot faded vinyl graphic from the nose of my travel trailer. Whether the surface is steel or fiberglass this takes the vinyl off with no damage to the paint underneath.I found that a plug in drill worked the best to remove the material. more consistent than a battery drill.
By safbuys
April 21, 2022
I used thus ABN Rubber Eraser Wheel to remove all of the ,swoosh, decals on the side of our 38 foot Monaco fiberglass coach. They had baked on in the Arizona sun for 16 years and were cracked and fading but firmly attached. I had tried the heat gun. I had tried decal remover. I had started with a 3M wheel but switched because it was not getting it done and it was heating up the decals and smearing residue into the fiberglass that could not be removed with an adhesive remover. The ABN wheels work great. They are firm. they grip well. they stay round and they do not burn into the paint. My job is so high I bought 20 total. They worked flawlessly including removing the decals from the painted fiberglass areas below the belt line ... all the cargo bay doors.
By skjerpen
April 20, 2022
Lasted a lot longer than I was expecting it to. removed all the brand badges off my ,dodgr ram 3500 cummins turbo diesel 4x4 heavy duty slt, and ys. thats how many badges were on there. Also was able to remove the adhesive for the bumper strips on the lower portion of the cab. removed some stickers off the windows along with some mystery gunk off the window. and some stubborn something off the chrome bumpers. Do not use on plastic. it will melt and leave a mark. Otherwise. super great. did all of this with 1 broken shoulder. easy peasy.
By dave 0375
April 18, 2022
I used this wheel to remove the adhesive tape from molding on the painted surface is of my truck. I wish I had known about using a rubber wheel and drill to remove the tape. It would have saved me many hours of trying to remove the tape with alcohol and cleaner. In the process. I lost some paint. This wheel ,or ones like it, rapidly took off the tape without damaging the paint in any way. Now. I know. how the professionals remove the left over tape when they remove the molding for painting. Thanks to You Tube for learning about this process. Great product. Would highly recommend.
By r3bman
April 18, 2022
Works very well. Used to remove vinyl pinstripes off my sons car. Edges were peeling up and he just did not like them. Used on a plug in Dewalt drill at half speed. Here is what I learned quickly. First. scuff the wheel edge to expose the soft rubber. The hard edge when it is new will make it difficult to start. Next. work about a 4, area at a time. Keep moving as you can burn the paint if you work in one area. I did not burn my paint but that is a tip for you. Clean off the rubber dust and go back over your lines if needed. Did not damage the paint at all. Very happy with this. Also removed a couple of scuff marks on the bumper.
By eric adams
April 14, 2022
I have a 2010 GMC and wanted to remove the trim,bumpers on the door. I was a little worried that it might damage the paint given the age of the vehicle but I did a test area and it worked perfect. I was able to remove the actual trim with fishing line. then hit it adhesive with the eraser. I went back through with a little bit of Goo Gone to clean everything up. On a 4 door truck I probably spent 1.5 hours start to finish. Insanely quick compared to the amount of time I have spent doing it before.
By leecita
August 25, 2021
I used this to remove the pinstripe on my previously owned 2016 Honda Accord Sport. I live in TX, so though the pinstripe wasn't very old, it has baked long enough in the hot TX summers to have some extra crusted on goodness! I watched a few videos on using an eraser wheel for such purposes, attached this to our Ryobi power drill, and went to work. Definitely requires a strong hand and some decent leverage of your body weight, but it worked great! I don't do much work with a cars (I'm a 30 something female accountant with very little interest in spending time on my vehicle, but the superficial part of me didn't care for the outdated aesthetic of a pinstripe). The pinstripe on both sides of the car ate through maybe 1/3rd of the useable portion of the eraser wheel...plus, I used it to buff out a few other scuffs and marks while I was at it. I'll be holding onto the wheel to buff out new marks in the future. I probably spent about 2.5 hours on the whole project, but now you would never know I had a pinstripe. The paint looks as good as new. Highly recommend.
By landmanhall
August 24, 2021
I used this to remove the remnants of the body side moulding of a 1994 Mercury Grand Marquis. The wheel went right through the leftover foam tape and the adhesive underneath without scratching or marring the paint significantly. I attribute the small amount of marks to be from dirt still adhered to the tape. You have to use a good car wash soap and a detail brush to remove as much dirt before using this wheel. It does take some skill but the learning curve is quick. I suggest a corded drill and a firm grip and a medium to light touch. Once I polished the area you could not tell anything was ever there. Put a drop of lock tight on the threads as soon as you open it, trust me.
By stoberkins
August 16, 2021
I bought a truck that had some ugly pinstriping and pieces of foam tape around the edges of the bed from where a topper used to be. I was skeptical of this product at first considering it was “off brand,” but boy was I wrong. I put this on my cordless drill, set it to a higher gear on drill mode to get maximum speed, and this magical device PLOWED through the pinstriping. I removed the back-to-front length on one side of my truck in about 2 minutes. It chewed through the pieces of double sided tape stuck to the bed of the truck. Obliterated that annoying dealership sticker. Don’t hesitate. This thing works 200% better than you expect it to.
By mitch white
April 8, 2022
Awesome product!! Took the four door molding strips off my duramax. I peeled them off and used no solvent to get any of the tape off. This wheel took every bit of tape and adhesive off both sides of my four door truck. Use Light pressure and let the wheel do the work. I found that up and down. 45 degree angle motions worked best. Use in a dragging downward motion at a 45 degree angle and you can rub the sticky residue off with your hand. You still have to work up a little sweat however once you get your motion. you will be rolling and getting it done. ONLY USE DRY AND ON DRY PAINT. Anything slick or wet cancels out the wheels friction and does nothing. When I had semi,finished. I washed the areas with soap and water. Then let it dry completely and go back with your wheel and ,erase, any spots you missed. A good cleaner wax afterward brings it all together. One wheel did four molding strips on a crew can truck. Get a second wheel if you have more to do. Do not use too much pressure and find a good rhythm will get er done. Would highly recommend!!
By rootessa
April 2, 2022
I bought this to remove the 30 year old decals from my Toyota Dolphin. Let me tell you. the buggers are baked on from years in the sun. I bought one to try it out. It lasted long enough to remove half the decals so I will buy another one. This worked very well for me and it was very easy to use. My ugly decals are slowly going away. YAY! This removed the decals from both paint and fiberglass without marring the surfaces. Maybe it is due to the age. but it did not leave any gummy residue. It took everything off.
By stealthls2
April 2, 2022
I only have used this for one purpose so far. removing what seemed like a mile of 3M VHB tape from the roof of my van. ,If you are not familiar with VHB it is a super strong sticky double sided tape. which in my case holds solar panels on my roof at highway speeds. Works great but crazy difficult stuff to remove., This did the job. removing every bit of tape and residue. while doing no harm at all to the paint. Although use consumes the rubber of the wheel. it lasted a surprisingly long time and got the job done with plenty left over wheel for future use.
By dave hvabeach
April 1, 2022
I wish I took pictures but on my sons truck. a widow Guard broke and he was going to replace it. It was held on by double sided tape. He pulled the old one off but the double sided tape stayed. We tried goo begone. wd40 all different internet suggestions before someone told me about this. Ordered and 5 minutes after delivery it was done. Easy to use. ran it from my cordless drill. just a little bit of pressure and removed the tape and didnt hurt the paint on the truck. This is a must have for everyone is tool box.
By tommy g.
May 6, 2022
I highly recommend this eraser wheel! I am a former body shop owner and used eraser wheels often. This wheel is as good of quality as the high dollar 3M we used in the shop. There 2 things people do wrong when using a wheel like this...one is to much RPM and the other is to much pressure against the decal they are trying to remove.Used correctly this wheel is a super value.
By bl
April 30, 2022
purchased this wheel to debadge my 2019 Ram decals. Popped it onto my cordless drill and went to town. This thing worked very well. Did not leave any marks on my paint and completely removed even some stubborn adhesives. I wore it down quite a bit with all that I needed it to do but it is definitely worth the money. Made the job so much easier than some other methods I have seen.Would 100, purchase another if I ever needed to.
Top Sellers More
Portable Stove Top Grill Rack Folding Stove Grill Holder Heating Bracket Support
€99.37
Retro Vintage Personality Bronze Metal Water Pipe Shaped Wall Lamp
€81.55
HPRT CP4000L Full Color Photo Printer
€199.44
CUBOT X11 3G Android 4.4 5.5" Smartphone MTK6592 Octa Core 1.4GHz 2GB RAM 16GB ROM
€221.41
KKmoon® 7" Video Door Phone Intercome Doorbell Remote Unlock Night Vision Rainproof Security CCTV Camera Home Surveillance TP01H-12
€175.68
OUR SITE RUNS OF COOKIES
