• HABOTEST AC/DC Digital Clamp Meter True-RMS Multimeter Anto-Ranging Multi Tester Current Clamp with Amp Volt Ohm Diode Capacitance Resistance Continuity NCV Temperature Duty Ratio VFD Tests
HABOTEST AC/DC Digital Clamp Meter True-RMS Multimeter Anto-Ranging Multi Tester Current Clamp with Amp Volt Ohm Diode Capacitance Resistance Continuity NCV Temperature Duty Ratio VFD Tests

HABOTEST AC/DC Digital Clamp Meter True-RMS Multimeter Anto-Ranging Multi Tester Current Clamp with Amp Volt Ohm Diode Capacitance Resistance Continuity NCV Temperature Duty Ratio VFD Tests

:

110.08

:

:

: ...
.

...

Anguilla
: china

colore:

:

Special discount has ended

Please note each user for only 1 item(s)

This is a dual impedance true RMS digital multimeter integrating a variety of measurements like AC/DC voltage, AC/DC current, frequency, duty ratio, resistance, capacitance, temperature, diode, continuity, NCV, VFD, inrush current, etc.. And there are more functions like last data hold, flashlight, Max./Min./Relative value, Celsius/Fahrenheit degree, and zero key. 

Features:
CLAMP MULTIMETER: Measures inrush current, VFD current/voltage, AC/DC current, AC/DC voltage, frequency, duty ratio, resistance, continuity, diode, capacitance, temperature, non-contact AC voltage (NCV) detection, and live detection.
WIDE OPENING JAW: Opening jaw capacity is 40mm, wide enough to measure without disturbing the circuit.
LOUD BEEP: NCV sensor send out audible and visual alarm once received electromagnetic signal.
MORE FUNCTIONS: Features data hold, flashlight, low battery display, Celsius/Fahrenheit degree, Max./Min./Relative value, and Zero(reset) key.
SAFE TO USE: Designed and conforms to IEC61010-1, CAT III 1000V, safe and reliable.
AUTO-OFF: Auto power off within 15 minutes if there is no operation, helps conserve the battery.
MULTI TESTER: Comes with 2 test leads and a thermocouple to be used as a multitester.

Note:
*MUST read the user manual carefully before use for safety.
*Battery not included.

Parameters:
Display: 6000 count
Clamp Opening Size: 40mm
Auto-off: approx. 15 minutes
Max. Voltage Between Terminals and Earth Ground: AC750V or DC 1000V
Range Resolution Accuracy
DC Current (MAX current: 1000A)
60A 0.01A ±(2.5%reading+8)
600A 0.1A
1000A 1A
AC Current (MAX current: 1000A, True RMS)
Frequency range: 0.1~600A: 40Hz~400Hz
600~1000A: 40Hz~60Hz
60A 0.01A ±(2.5%reading+8)
VFD: ±(5.0%reading+10)
INRUSH: ±(5.0%reading+10)
600A 0.1A
1000A 1A
DC Voltage
Input impedance: 10MΩ(LoZ: 300kΩ)
Overload protection: AC750V/DC1000V
Maximum input voltage: AC750V/DC1000V
600mV 0.1mV ±(0.5%reading+5)
6V 0.001V
60V 0.01V
600V 0.1V
1000V 1V ±(0.8%reading+5)
AC Voltage
Input impedance: 10MΩ(LoZ: 300kΩ)
Overload protection: AC750V/DC1000V
Maximum input voltage: AC750V/DC1000V
Frequency range: 40Hz~1kHz, True RMS
600mV 0.1mV ±(0.8%reading+5)
6V 0.001V
60V 0.01V
600V 0.1V
750V 1V ±(1.0%reading+5)
VFD(750V) 0.1V ±(2.0%reading+5)
Resistance
Overload protection: 250V
600Ω 0.1Ω ±(1.0%reading+5)
6kΩ 0.001kΩ
60kΩ 0.01kΩ
600kΩ 0.1kΩ
6MΩ 0.001MΩ
60MΩ 0.01MΩ
Diode It displays the approximate forward voltage value of the diode. Forward DC current is about 1.5mA;
Reverse DC voltage is about 3V;
Overload protection: 250V
Continuity <approx. 30Ω, the buzzer sounds and the LED light on Test Voltage Approx. 1V
Overload protection: 250V
Capacitance
Overload protection: 250V
10nF 0.001nF ±(4.0%reading+5)
100nF 0.01nF
1000nF 0.1nF
10μF 0.001μF
100μF 0.01μF
1000μF 0.1μF
10mF 0.001mF
100mF 0.01mF ±(5.0%reading+10)
Frequency/Duty Ratio
Overload protection: 250V
10Hz 0.001Hz ±(1.0%reading+3)
100Hz 0.01Hz
1000Hz 0.1Hz
10kHz 0.001kHz
100kHz 0.01kHz
1000kHz 0.1kHz
10MHz 0.001MHz ±(3.0%reading+3)
1~99% 0.1%
Temperature
*The below precision does not inlcude the error of thermocouple probe.
1℃ ±3℃ (-20℃~0℃)
±1.0% or ±2℃ (0℃~400℃)
±2.0% (400℃~1000℃)
1℉ ±6℉ (-4℉~32℉)
±1.0% or 4℉ (32℉~752℉)
±2.0% (752℉~1832℉)

Specifications:
Brand: HABOTEST
Material: ABS
Color: Black and Red
Battery: 2pcs, 1.5V, AAA alkaline battery (batteries not included)
Item Size: 24*8*4.5cm / 9.44*3.14*1.77in
Item Weight: 311g / 10.97oz
Package Size: 27.5*13.5*5.5cm / 10.82*5.31*2.16in
Package Weight: 620g / 21.86oz

Packing List:
1 * Digital Clamp Meter
1 * Thermocouple
2 * Test Lead
1 * User Manual(English)
 

  • 5
  • 4
  • 3
  • 2
  • 1