Favorites
  • Creality 3D Printer PLA Filament 1.75mm 1kg/2.2lbs Filament Dimensional Accuracy +/- 0.02 mm, Black
Creality 3D Printer PLA Filament 1.75mm 1kg/2.2lbs Filament Dimensional Accuracy +/- 0.02 mm, Black

Creality 3D Printer PLA Filament 1.75mm 1kg/2.2lbs Filament Dimensional Accuracy +/- 0.02 mm, Black

4.6
(19 Customer Reviews) (0)

Share:

Price:

€

84.28

Ship From:

  • China Warehouse
  • Germany Warehouse

Dispatch:Usually will be shipped inbusiness dayshours

Shipping: Loading...
Sorry, it seems that there are no available shipping methods for your location.Please contact us for further assistance.

Loading...

Ship to

Anguilla
: china

color:

QTY:

Wholesale Inquiry

Special discount has ended

Please note each user for only 1 item(s)

Buy Now
Preorder Add To Cart Out of Stock
Add to Favorites
Features:
1KG/2.2lb filament net weight, 1.75mm filament diameter.(Tolerance: ±0.02mm)
High purity of environmental protection raw materials, no doping of waste and recycled materials, no plugging and insufficient extrusion.
Good tensile strength, good ductility, good flow, low shrinkage, good flexible and low weight.
Great print effect, no warping, no bubbles, smooth and delicate with accurate color. Suitable for all 3d printers on the market.
Vacuumed sealed package, this will enable you to easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt.

Specifications:
Color: Black/White/Yellow/Red/Grey(optional)
Material: PLA
Density: 1.25±0.05g/cm³
Melt Flow Rate: 5-7g/10min(190℃2.16kg)
Water Absorbency: 0.5%
Tensile Strength: ≥60MPa
Flexural Modulus: ≥60MPa
Fracture Elongation: ≥3.0%
Filament Diameter: 1.75mm
Bubble: 100% No Bubbles
Temperature: PLA(No Heated Bed)
Filament Weight: 1kg / 2.2lb(Length: 340m)
Item Size: 20 * 20 * 6.6cm / 7.9 * 7.9 * 2.6in
Package Size: 21 * 21 * 7cm / 8.3 * 8.3 * 2.8in
Package Weight: 1.2kg / 2.6lb

Note:
Please allow 1-5mm measuring deviation due to manual measurement.

Packing List:
1 * Filament Roll

Ask a question

Customer Reviews

Average Rating:

4.6

based on 19 Customer Reviews

  • 5 stars
    42%
  • 4 stars
    58%
  • 3 stars
  • 2 stars
  • 1 stars

Share your thoughts with other customers and get Godjm Points, the first 5 reviews get DOUBLE Godjm Points!

Write a Customer Review

  • By ed roth

    July 31, 2021

    I've had no issues with the quality or consistency of this filament. The spool is nicely wound and unrolls uniformly. End products are what you would expect from a good PLA.

    Is this helpful? (0) (0)

  • By dale reekstin

    July 27, 2021

    Bought for a project for my son… works excellent

    Is this helpful? (0) (0)

  • By regina hill

    July 12, 2022

    Nice and reliable, easy to pront with no problems printing at 200C however parts were a little brittle and pushed up to 210C and all is well . Think 210 to 220 or so is the right place

    Is this helpful? (0) (0)

  • By chris collins

    July 25, 2021

    Phenomenal quality. Printing the same items with different filament, there is a noticeable difference.

    Is this helpful? (0) (0)

  • By geoffrey stillings

    July 25, 2021

    Prints really good even at higher speeds

    Is this helpful? (0) (0)

  • By sandro teixeira

    July 24, 2021

    Some of the best PLA I have used since the start of the pandemic. I have had to experiment a lot with different brands, colors, etc due to PLA shortages across the market. This brand is so good I wish I had ordered multiple before it became unavailable.

    Is this helpful? (0) (0)

  • By kathleen k toews

    July 24, 2021

    This product is very good. I have searched for a long time before. Many similar products, most of which are of poor quality, soon broke down. I finally found this great product. I am very happy!

    Is this helpful? (0) (0)

  • By xavier c flores

    July 24, 2021

    Great product. Great price. Had no issues to speak of. Leveled the bed, ran a couple of test prints and started printing right away. Would recommend and will purchase again.

    Is this helpful? (0) (0)

  • By j welker

    July 21, 2021

    Great print results and I love the properties of PLA+.. Printing at a higher temperature and getting good adhesion and print quality. Very happy with this filament.

    Is this helpful? (0) (0)

  • By kristin nelson

    June 27, 2022

    read this first. I should mention I often run 24hr prints and all breaks have been when the machine was unattended. The spool was never removed from the machine after the first load.

    Is this helpful? (0) (0)

  • By ayan elmi

    June 23, 2022

    This is my first 3D printer ever. Thanks Creality and Comgrow for making my experience pleasant. In fact, I will be ordering the Ender 5 in the next day or so of course from Comgrow. Good luck makers!

    Is this helpful? (0) (0)

  • By valerie dorman

    June 8, 2022

    Adhesion is much better with this PLA than I expected. I usually need glue or hairspray to help adhesion to my (heated) plate but I haven' t experienced any issues with this one yet.

    Is this helpful? (0) (0)

  • By timothy miller

    May 21, 2022

    As a beginner printer, it is extremely popular right now. And for very good reason:  Excellent price point puts the base model.Strong, growing community.  For your first few prints, practice by making some of the upgrades from Thingiverse.

    Is this helpful? (0) (0)

  • By deamon customs

    May 16, 2022

    I am a first time 3d printer owner, and this printer came highly recommended. so thank you Comgrow!

    Is this helpful? (0) (0)

  • By jaiden morris

    May 15, 2022

    After much research and many YouTube videos over the past two years, I've finally decided to get into 3D printing by purchasing an Ender 3 Pro. Have patience, and check that your bed is level at least every other print and you'll be fine.

    Is this helpful? (0) (0)

  • By wendy zhang

    May 10, 2022

    Running this in a Qidi xmax have printed a lot of parts with it, no issues.

    Is this helpful? (0) (0)

  • By loriann puccio

    May 8, 2022

    Comgrow sent me a new bed and it's perfect, I'm getting really high quality prints now. But these issues are beyond tweaking, this is just downright major repairs straight out of the box brand new.

    Is this helpful? (0) (0)

  • By dana garcia

    May 6, 2022

    The big reason this gets 5 stars is the value.I like the PLA + better and will use it more often, this was for sure a great value and performed almost as well as more expensive spools, so 5 stars from me.

    Is this helpful? (0) (0)

  • By deniese haskins

    May 5, 2022

    This printer completely met my expectations. This really is a phenominal printer for less than $300. I'm spending WAY more time printing and tweaking models and then printing some more. I can recommend this printer without hesitation.

    Is this helpful? (0) (0)

Top Sellers More

Ask a new question

Your Question has been successfully sent our team. Thanks for question!

OK

Please activate your account and then to buy,We will resend the activation email to help you complete your registration.

OUR SITE RUNS OF COOKIES

godjm use cookies to give you the best shopping experience. If you continue to use our services or create a new account, we will assume that you agree to our  Privacy Policy.